Facebook Tracking Image
 
close
Search
Menu
Recently viewed products

Technique Tie-Dye Kits

Tulip® One-Step Hearts Tie-Dye Kit

$12.99
$10.39
Everything you need to make your own heart tie-dye designs!
- +

The easiest way to create tie-dye heart designs is with the Tulip® Hearts One-Step Tie-Dye Kit®! This easy-to-use tie-dye kit comes with the tools and special instructions you need for a colorful tie-dye experience that’ll capture your heart – literally! Stocked with 4 bottles of vibrant coordinating One-Step Dyes (blush, fuchsia, mint and royal blue), plus a washable marker for creating heart design guidelines on fabric, rubber bands, gloves, and a hearts tie-dye inspiration guide. This kit is ready to add color to your wardrobe with radiant tie-dye hearts you can mix & match with each other and your other tie-dye creations. Makes a great gift too!

1. Protect work surface with a plastic tablecloth or trash bags. Cover with a layer of paper towels.
2. Prewash fabric to remove sizing. Do not use fabric softener or dryer sheet.
3. Choose desired technique. If using wet technique, use directly from washer. If using dry technique, first dry fabric in dryer.
4. Wearing rubber gloves, add water to dye bottle, filling to line. Replace cap tightly. Shake until dye is dissolved. Use full-strength for intense colors. For a lighter shade of color, add more water using extra bottle if needed.
5. Apply dye on fabric, checking to make sure dye has penetrated into creases and folds. Do not over-saturate fabric. If dye colors are applied too close together, the colors may become muddy. Check backside of fabric item to make sure dye has penetrated to backside. If not, carefully flip fabric item over and add dye. 
6. Cover dyed fabric with plastic wrap to keep damp. Let set 6-8 hours or longer for most intense colors. Fully rinse dyed fabric in warm water until all extra dye is removed and water runs clear - removing rubber bands if used.
7. Fill washer to large load setting with hottest water suitable for the fabric and a small amount of laundry soap. Wash and dry separately. 8. Wash separately the first few washes. Do not allow dyed fabric to rest wet on other items.

If no water fill line is present on tie-dye bottle, add water to about a quarter inch from the top of the bottle, allowing enough room to shake and mix the dye.

Note: Do not add water to dye until you are prepared to apply it. Apply dye within 72 hours after mixing. Dye left unapplied after 72 hours will begin to lose concentration and will result in noticeably weaker color intensity.

Cover work surface with disposable plastic tablecloth or plastic trash bag to prevent dye from staining work surface.  

Make sure excess dye dust is removed from work area, as it is invisible until it reacts with water.

Create new colors by blending dyes.

Cover dyed fabric with plastic to keep it from drying out; fabric that dries before dye is finished setting can result in weaker color concentration and less intensity.

Precautionary note: Always wear gloves when working with dyes. Dry dye powder can cause an allergic reaction in some people.

Avoid inhaling dye dust over an extended period of time. Use in well-ventilated area.

Supervise children making tie-dye projects.

If no water fill line is present on tie-dye bottle, add water to about a quarter inch from the top of the bottle, allowing enough room to shake and mix the dye.

Caution: May irritate skin and eyes. Avoid contact with eyes, skin or clothing. Do not swallow. Wear rubber gloves and safety glasses. Keep out of reach of children. First Aid Treatment: Contains organic dye and sodium bicarbonate. If swallowed, contact a poison control center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water.







Close